Garage Door Repair Installation Raleigh, NC

Performed an installation of a linear belt operator for a single two car insulated garage door.

Customer in Millbrook / Midtown Raleigh area hit garage door with his car and the door came off track. Customer took door disassembled door and took it down to try to fix it and was unable to get it back together again. Reassembled door and reinforced three brackets. Replaced three rollers. Door operating well now.

In North Raleigh / Stonehenge are - installed new 16'x7' Hormann Clima Tech 4400 Garage Door - Ranch, Long Panel Design, Insulated (Polyurethane), Steel Back, R-Value of 15.7. This is a seriously insulated door. Customer wanted to try to better control temperature in the room above the garage. Removed old door from the property.

Customer in North Raleigh / Crabtree area was unable to open the garage door. The remotes and wall button wouldn't work. Asked customer to pull the red cord and try to lift the garage door and she was unable to (door too heavy). Confirmed torsion spring was broken. Replaced springs on a single two-car garage door. Performed safety check and serviced door.

In North Hills area of Raleigh, customer has door with multiple dents in it from kids playing hockey and hitting the door with hockey pucks. Counted at least 50 dents. Took measurements for a new door and discussed styles and insulation levels with the customer so that a free estimate can be provided.

Customer in North Raleigh / Leesville Rd area had a door that was hanging crooked and wouldn't go all the way down. One of the rollers was out. Reinforced door and replaced two rollers. Balanced, adjusted, and lubricated the door and it's operating correctly now.

In North Raleigh - north of 540 off Creedmor Road, customer with an old Wayne Dalton TorqueMaster system had a broken spring. Converted spring system for a 10-ft garage door to a torsion spring system. Balanced and serviced the door. Performed safety check.

Customer in North Raleigh / North Hills area called with broken spring. Customer confirmed they heard a loud bang and sent a picture showing broken spring. Customer also needed cables to be replaced (they were frayed).

Customer in North Raleigh / Midtown area reported door won’t open, grinding motor. Customer has chain drive and confirmed the springs are intact. The car is stuck in the garage. Repaired Liftmaster garage door - screwdrive coupler was bad. Got garage door opener operational and helped the customer free his car.

Installed Chamberlain opener that customer purchased at Home Depot.

Installed a new 16x8 Hormann ThermaSafe 3200 insulated steel back single two car garage door with a customer bought chamberlain Wi-Fi belt drive quiet motor.

Customer in North Raleigh heard a lound bang and then the door would no longer open. Confirmed via a texted photo that the spring was broken. Replaced a pair of broken torsion springs on a 2-car garage door in North Raleigh.

Customer in Raleigh / Brier Creek area called - door wouldn't close all the way and said one section might be bent, but the door wasn't hit. Issue was a broken torsion spring. Replace spring and serviced the door. Did a safety check.

Customer in North Raleigh / Leesville Road area had sensor issues with a Chamberlain opener. Serviced the door and opener including lube and safety check. Door now opening and closing properly.

In North Raleigh, installed new Liftmaster (LM84505R) Secure View™ Ultra-Quiet Belt Drive Smart Opener with Camera and Dual LED Lighting openers for two garage doors.

Customer in Raleigh / Stonehenge area having opener issues - door wouldn't close and Liftmaster opener was giving an "excessive force" error. Reset opener and inspected and serviced door and springs.

Installed new garage doors for customer in North Raleigh / Stonehenge area: Two 9' x 7' Hormann TS3200, Cottage panel, glass, Cross Arch inserts white color.

Customer in North Hills area of Raleigh called with a door that wouldn't open. The opener made noise but wouldn't do anything. Determined that spring was broken. Customer decided to use this opportunity to replace the entire door since it's time to do so and the new door would come with new springs. Installed a spring block while the door is on order.

Customer in North Hills / Crabtree area of Raleigh called with a door that was hanging crooked. The bottom roller had popped out. Serviced the door - adjusted cables, lubricated, balanced the door. Door is operating well now.

Customer in Raleigh / North Hills area had Liftmaster opener issues - the opener won’t close unless holding wall button down. Assessed cost to repair and customer opted to replace with a new Liftmaster 84505R Secure View™ Ultra-Quiet Belt Drive Smart Opener with Camera and Dual LED Lighting. Also programmed extra car remotes and keypad.

Customer in Raleigh / North Hills complained that the garage door and opener are very loud. Serviced and lubed the door and performed safety check. Provided homeowner with an estimate to replace the door as it is well beyond its useful life.

Replaced pair of torsion springs for 2-car garage door for customer in Raleigh / North Hills area. Also replaced brackets and rollers on both sides of the top section, as they were pulling away from the door, causing the door to be unstable and very noisy.

Replaced a pair of springs for a 16x7 garage door

Customer in North Raleigh / Strickland Road area had broken spring. Replaced both springs of a 16' wide door. Serviced door and did a safety check.

Customer in North Raleigh / Stonehenge area had issues with old Genie opener. Cost to repair was excessive. Customer chose new Liftmaster 84505R Secure View Ultra-Quiet Belt Drive Smart Opener with Camera and Dual LED Lighting. Installed new opener and serviced garage door. Gave customer a tutorial on how to do a safety check.